AMPLIFICATION – MAGA ENGINEERING® ME 20K

ME20K

FEATURES

  • 20 000 W amplifier with 4 output channels.
  • 4 x 5000 W (2 Ω / 4 Ω), 4 x 2500 W (8 Ω), 4 x 3500 W (Hi-Z 70 V), 4 x 5000 W (Hi-Z 100 V).
  • Maximum output tension: 235 V peak.
  • Maximum output current: 71 A peak.
  • High-performance, light weight Class D output stage. Integrates state-of-the-art silicon carbide (SiC) transistors allowing to work at very high tension levels with incredible dynamics, outstanding sonic punch and exceptional reliability.
  • Upside-down design prevents accumulation of dust on electronic components.
  • Powerful double-precision 64-bit DSP (4 inputs/4 outputs) at 96 KHz, with high-performance AD/DA converters at 96 KHz/24 bits. Minimum process latency: 0.85 ms. Tailored FIR processes up to 1000 taps.
  • Dante™ Networking (compatible with AES67 and DDM) and AES3 digital inputs; optional.
  • 2 x Ethernet ports and USB 2.0 port for DSP control, daisy-chain connection and firmware update.
  • Extra-large 4.3” IPS display with user interface via capacitive touch panel.
  • Universal power supply with PFC.
  • PCM™ (Power Control Management) system for DSP-enabled distribution of the amplifier total power over channels according to the needs.
  • Protection systems in both the power supply and the audio modules (Soft-start, Turn-on Turn-off transients, Muting at turn-on, Overheating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL™ and PCM™). These systems work continuously in real time and with the highest reliability to keep all amplifier parameters always within safe working thresholds.
  • Fast and powerful cooling system with front-to-back ventilation.
  • Neutrik® XLR and speakON® input and output connections.
  • Neutrik® powerCON® network connection (32 A version).
  • 2-year warranty program.
  • Designed and developed in Spain.

DOWNLOADS

  • Features and technical specifications: ME 20K.pdf

TECHNICAL SPECIFICATIONS

  • General
    Number of amplification channels: 4
    Total power (all channels load): 20 000 W
  • Maximum output power
    8 Ω: 4 x 2500 W
    4 Ω / 2.67 Ω / 2 Ω: 4 x 5000 W
    8 Ω bridged / 4 Ω bridged: 2 x 10 000 W
    Hi-Z 70 V: 4 x 3500 W
    Hi-Z 100 V: 4 x 5000 W
  • Amplifier output module
    Maximum output tension: 235 V peak
    Maximum output current: 71 A peak
  • Audio
    Gain: 26 dB – 44 dB (in 1 dB steps)
    Total harmonic distortion: < 0.05 %
    Signal to noise ratio (SNR): 115 dBA
    Channel separation (crosstalk 20 Hz – 1 KHz): > 70 dB
  • Front panel – Interface
    DSP control and firmware update: 1 x USB 2.0 Type B
  • Rear panel – Interface
    2-channel analog I/O (input + link): 4 x Neutrik® 3-pin XLR, electronically balanced
    AES / EBU / I/O (input+ link): 2 x Neutrik® 3-pin XLR
    Output connections: 4 x Neutrik® speakON®
    Ethernet control ports (daisy-chain): 2 x RJ45 Neutrik® etherCON®
    Dante™ Networking* digital inputs (compatible with AES67 and DDM): 2 x RJ45 Neutrik® etherCON®
  • Mains power and consumption
    Rated tension: 100 V – 240 V AC, 50 Hz – 60 Hz
    Operational tension: 90 V – 265 V AC
    1/8 Rated power (@230 V, 4 Ω): 14 A – 3268 W
    1/8 Rated power (@120 V, 4 Ω): 26.8 A – 3268 W
  • Dimensions and weight
    Width: 483 mm
    Height: 89 mm
    Depth: 355 mm
    Weight: 9 kg

* The Dante™ connection is optional.